kbikeparts.com

 

BMW K75 K100 K1 K1100 PARTS.

 

 

"Other Stuff"

 

Welcome to my "Other Stuff" page. This page contains things that are not necessarily standard BMW parts but are useful for maintaining, modifying or upgrading your K bike.

Be sure to hit the F5 key on your keyboard to see if anything new has been added since your last visit.

Return to main page.

 

Applies to

Picture

(click to enlarge)

Name

Description

Price

(US $)

All K bikes

NE-8 Key

Not a BMW OEM key but an aftermarket key blank that works for K bikes. Alloy.

$4

All K bikes

NE-7 Key

Not a BMW OEM key but an aftermarket key blank that works for K bikes. Steel - usually needs to be cut at a "real" locksmith.

$6

All K bikes  

Lost Key Service

Click here for  details

$67

U.S. Only

All K bikes

Bosch Premium Oil Filter

Same size as the BMW one and what I use in my K bikes. (Be sure to remove the sticker prior to installation.) 11421460845

$6

All K bikes

K Bike Oil Filter Wrench

..

$10

All K bikes

SS Throttle Body Hose Clamps

As K bikes age it is not uncommon for the rubber boots below the throttle bodies to crack and leak air due to age and repeated heat cycles. BMW used one-use Oetiker clamps in some locations on these boots.  When replacing those boots I cut off the old clamps with a Dremel cutting wheel and replace them with these slim re-usable stainless steel hose clamps. 11611460940 11611460900 11611460901

$2 ea

All K bikes

Fork Boots

Listed on main page. Click here.

 

All 1993 & Earlier K Bikes

50 Amp Alternator Upgrade

Click here for more info. 12312306020

(Except for the 1993 K1100RS which came from the factory with a 50A alternator.)

$150

Gen 1, 2 & 3 System Cases

Retainer Panels

Tired of stuff falling out when you want to get something out of a system case while it's on the bike?  These retainer panels solve that problem by keeping items from falling out of the inner half of a system case. They're made from 1/8" thick high density polyethylene so they're virtually indestructible and will outlast your bike.

(They're also good for fanning you campfire to help get it started.)

$30/pair

Gen 3 System Cases

Elastic Upgrade Kit

Bungee cord works much better than the weaker OEM elastic that doesn't last very long under regular use.  This kit includes 8 pre-cut segments of Bungee cord and sixteen stainless steel washers. Simply run the Bungee cord through the attaching point, put a washer over it and tie a figure eight knot.

(This is only for Gen 3 System cases with round locks that point outwards.) 46542315753 46542315753

$12

K1100RS

Side Cover Clip Repair Kit

When the middle mounting clip breaks on your K1100RS side cover there's no need to buy a whole new side cover.  Cut the old one off, drill a hole in the middle of it install one of these nylon coated steel clips with a spacer. Kit includes clip, spacer, small bolt and lock-nut.

$8

(for one kit)

K1100RS

Side Cover Post Hose

Is your post rubber hose lost or used up?  Vacuum hose will work but it's a little larger diameter so isn't a perfect solution.  The inside and outside diameters of this hose are identical to the OEM hose and do a better job. Sold in 20mm segments. 16131455350 46632307423 46632307424

$1 ea

K1100RS

SS Belly Pan Mounting Hardware

Set of 8 stainless steel button head machine screws, 8 stainless steel fender washers and 8 rubber washers that go behind the SS washers to protect your paint. (These screws have the same thread and pitch as the factory screws.) 46632308632

$12

K75s & 2V K100s

Typical cracked original fuel line:

 

Note: The line from the fuel rail goes to the rear pipe at the front left of the tank. The fuel line from the tank's front pipe goes to the fuel pressure regulator which is located behind (inside of) the throttle body assembly.

2V Fuel Line Replacement Kit

If your fuel lines are getting old and cracking then you may be considering replacing them.  Replacing them with BMW parts costs over $70 and you'll need to deal with the two one-use Oetiker clamps that attach the fuel lines to the fuel pressure regulator. This kit includes enough (plus a few extra inches) new fuel line and two  reusable BMW fuel line clamps to replace the Oetiker clamps. The fuel line is ethanol/methanol certified made for fuel injected systems and rated to 225 psi. It's just my personal opinion but I think you're better off using straight line as the OEM lines always seem to crack at the pre-angled parts of them. 13311461096 13311461011 13311461011 16121180409

$25

K100RS4V, K1 & K1100s

 

4V Fuel Line Replacement Kit

If your fuel lines are getting old and cracking then you may be considering replacing them.  Replacing them with BMW parts costs about $70 and you'll need to deal with the two one-use Oetiker clamps that attach the fuel lines to the fuel pressure regulator. This kit includes 4 feet (enough for the three lines you need to replace) of new fuel line and two reusable BMW fuel line clamps to replace the Oetiker clamps. The fuel line is ethanol/methanol certified made for fuel injected systems and rated to 225 psi. It's just my personal opinion but I think you're better off using straight line as the OEM lines always seem to crack at the pre-angled parts of them. 13311461973 11151461834 13311461971

$30

All K Bikes

Internal Fuel Line Replacement Kit

Two sections of BMW OEM 8x13 submersible fuel line to replace the fuel lines inside any classic K bike tank.

16121180040

$25

93 & Earlier K Bikes

 

Internal Hose From Bottom Of Fuel Pump To Fitting Near Gas Cap

This supposedly reduces cavitation below the fuel pump.

$8

K100RS & K1100RS

Mirror Leashes

These coated stainless steel mirror leashes keep your mirror assemblies from crashing to the ground if one of your mirrors gets knocked off or falls off of it's mounting clips.

$6/pair

K100RS4V & K1100RS

"Add-a-Fuse"

Both the K100RS4V and the K1100RS have three unused positions in the bottom of the factory fuse block.  If you're like me and don't like inline fuses for electrical items you've added to your bike then it is pretty easy to utilize those fuse positions. (I can show you how.) However, you need the proper terminals.

I've carefully salvaged several of them from the fuse blocks from bikes I've taken apart for just that purpose. I have them available in several wire sizes.  Being European, they are sized in mm2.  Here's their approximate equivalent in AWG wire sizes:

Wire Size

AWG Equivalent

0.5

20

1.0

16

1.5

15

2.5

13

Of course you can never have too large a wire for any application but you don't need 2.5 wire to charge a USB device, power your GPS or other small load applications.

 

Terminal Pairs:

 

IN

OUT

1.0

1.0

$10

1.5

1.5

$12

1.5

1.0 & 0.5*

$14

2.5

1.5 & 0.5*

$15

2.5

2.5

$15

* Terminal has two wires. Useful if you want to run multiple circuits through one fuse.

K100RS4V, K1 & K1100s

10 15A Fuses

Set of ten new 15A fuses.

(Just the fuses. Fuse block not included.)

$5

All K Bikes

Ceramic H4 Headlight Socket

Handles heat better than plastic.  Useful if you're adding headlight relays. Includes ceramic h4 socket, plastic cover and three terminals as pictured. (I have run out of blue ones but do have yellow ones.)

$5

All K75 models

Zombie Apocalypse Preparedness Kit

Includes:

Brand new K75 short block engine (black)

55 gallon drum of Mobil 1 15W-50 motor oil

20 oil change kits

10 fuel filters

2 sets of water pump seals

6 pair of triple Kevlar banded run-flat dual sport tires

Quick-release bracket for medieval mace that attaches to handlebars (mace not included)

Unbreakable aluminum baseball bat with ever-sharp titanium spikes and riding sling

Pair of Touratech "Samurai" anti-zombie front axle spikes

10 year supply of Mountain House freeze-dried scrambled eggs with bacon

$7,999

SALE!!!

$6,999

Return to main page.